"Click" on image for Photo

Description

• Air defrost models for storage temperatures of 35°F (1.6°C) or higher.
• 9 models from 900 BTUH to 5,100 BTUH at 10°F (5.5°C) TD.

• Air, electric and hot gas defrost models for room temperatures of 28°F (-2°C) or higher.
• 7 model sizes ranging from 5,000 BTUH to 27,000 BTUH at 10°F (5.5°C) TD.

• Air electric and hot gas defrost models for room temperatures of 35?F or higher, to -40°F (-40°C).
• 10 model sizes ranging from 4,100 BTUH to 30,600 BTUH at 10°F (5.5°C) TD.
• Specifications Acrobat (.PDF) 616KB.

• Air, electric and hot gas defrost models for room temperatures of 35°F (1.6°C) or higher to –30°F (-34.4°C).
• 10 model sizes ranging from 20 MBH to 90 MBH at 10°F (5.5°C) TD.
• Specifications. Acrobat (.PDF) 741KB

• Air defrost models use 7 fins per inch coils. Electric and hot gas defrost models are available in 6.5 or 4 fins per inch.
• 7 model sizes ranging from 62.8 MBH to 179.9 MBH at 10°F (5.5°C)TD.
• Designed for "Reverse cycle" or "three-pipe" hot gas defrost systems.

• For room temperatures from –25°F (-31.6°C) to +40°F (+4.4°C).
• Available in a wide range of capacities up to 30 tons, using various coil depths and fin spacing.
• For use in above or below freezing applications.
• Air, electric or hot gas defrost.

• Air and Electric defrost models for room temperature of 35°F (1.6°C) or higher to -10°F (-23°C).
• 10 model sizes ranging from 870 BTUH to 11,500 BTUH at 10°F (5.5°C) TD.

• Air defrost modes for room temperature of 35°F (1.6°C) or higher.
• 8 model sizes ranging from 3,700 BTUH to 20,400 BTUH at 10°F (5.5°C) TD.

• For room temperatures down to minus -40°F (-40°C).
• 7 model sizes ranging from 75.1 MBH to 193.3 MBH at 10°F (5.5°C) TD.
• Standard 3 HP, 1740 RPM, totally enclosed fan cooled motors.
• Designed for "reverse cycle" or "three-pipe" hot gas and electric defrost systems.

• For indoor use.
• Air cooled models suitable for high, medium and low temperature applications.
• Model sizes ranging from 1/4 HP through 5 HP.

• Indoor and outdoor air cooled semi-hermetic condensing units.
• High, medium and low temperature applications.
• From 1/2 HP to HP.

• Indoor and outdoor welded hermetic air cooled condensing units.
• High, medium and low temperature applications.
• From 1/2 HP to 5 HP.

• Indoor water cooled semi-hermetic condensing units.
• High, medium and low temperature applications.
• From 2 Hp to 30 Hp.
• Specifications Acrobat (.PDF) 225 KB.

• All ambient weather proof hermetic condensing unit.
• From 3/4 HP to 5 HP.
• High and medium temperature applications.

• Indoor and outdoor air cooled semi-hermetic condensing units.
• High, medium and low temperature applications.
• From 2 Hp to 30 Hp.
• Specifications. Acrobat (.PDF) 607KB.

• Indoor remote semi-hermetic condensing units.
• High, medium and low temperature applications.
• From 2 Hp to 30 Hp.

• Compact, low silhouette and lightweight for easy room mounting.
• Condensing unit comes with a completely factory wired all-inclusive control panel.
• High medium and low temperature applications.
• From 20 tons to 60 tons.

• For refrigeration or air conditioning duty.
• From 7 to 206 tons.
• One to twelve fan models.
• Thermospan Coil design.
• 850 RPM quiet, low speed fan motors.
• Rugged heavy-gauge galvanized steel rail motor mounts/support.
• Complete selection of electrical fan cycling and speed control options.

• Heat reclaim unit heaters enable you to convert waste heat from a refrigeration system into free heat for backrooms, work areas and sales areas.

• Designed for air conditioning, heating and ventilation.
• Available in single zone, horizontal or vertical models.
• From 700 to 57,000 CFM.

• Air cooled condensers are ideally suited for smaller indoor or outdoor applications requiring up to 10 tons nominal capacity.
• 5 models from 26.3 MBH to 127.1 MBH at 25?F TD.

• Centrifugal fan air cooled condensers built to suit a wide range of applications by varying coil depth, fin spacing and air flow through the unit.
• Full line of accessories and a wide range of arrangements are available to meet installation requirements.
• From 4 tons to 90 tons.

• Direct drive fluid coolers may use water or glycol as fluids for:
  Process fluid cooling
  Remote radiators
  Computer cooling secondary heat exchangers
  Secondary fluid supermarket systems

• Coils are engineered to deliver the maximum possible heat transfer efficiency under all operating conditions. Select standard coils from any of the following combinations:
  7, 8, 10 or 12 fins per inch spacing
  From 2 through 10 rows deep
  From 6" through 120" nominal tube length
  From 6" through 36" high face (1-1/2" increments)
  Other sizes available

• Heat reclaim coils are available in standard sizes as well as in any combination of the following:
  8, 10 or 12 fins per inch spacing
  2, 3, 4 or 6 rows deep
  From 6" through 42" high face (1-1/2" increments)
  From 6" through 120" nominal tube length
  Other sizes available

• Water heating and cooling coils can fill requirements for any design load.
• Available in 2 to 10 rows.
• Intermediate drain headers available.

• A wide variety of tube and fin patterns is available to suit all refrigerant, glycol, water or steam applications.