
Home	About Us	Products	Projects	Contact Us	Request For Quote	Search
International Turn-Key Suppliers of Commercial/Industrial Refrigeration Equipment and Projects

CleanSeal Pharmaceutical and Clean-Room Doors

Designed in partnership with the pharmaceutical industry, CleanSeal doors set the standard by which all clean-room and pharmaceutical doors are measured.

M-220 Swing Door - Single Panel - Manual Operation DOOR SIZES: • 8' x 8' (2438mm x 2438mm) maximum. PANEL CONSTRUCTION: • Unitized design. • Heavy duty molded fiberglass reinforced polyester shells. • 20 gauge stainless steel edge capping. • Seamless one piece construction. • Standard with stainless steel push/pull handles. FRAME CONSTRUCTION: • Face welded 16 gauge 304, #4 stainless steel (knockdown optional).	APPLICATION: Cleanroom and clean production areas that require limited doorway side clearance. FEATURES: • Heavy-duty fiberglass for personnel and hand truck passage in clean manufacturing/production environments. • Totally seamless unitized one piece fiberglass panels. • Sealed non-absorptive panels with lightweight poured polyurethane foam for exceptional strength and dimensional stability. • Reinforced edges and high luster gel-coated surface. • Highly corrosive resistant panels and hardware. • Internal steel plate reinforcement at hinge areas for added strength. • Stainless steel mounting hardware. • Face welded 16 gauge, 304, #4 stainless steel frame (knockdown and/or 316 stainless steel finish optional). OPERATION: • Manual. WARRANTY: • One year on all components. OPTIONS: • Vision panels. • Stainless steel kickplates. • Locksets, panic devices, etc. • Interlock system (i.e. maglocks, etc.). • Four sided seamless 304, #4 stainless steel panels. • Other fiberglass colors (consult factory). 220 pdf
M-225 Swing Door - Single Panel - Power Operation DOOR SIZES: • 8' x 8' (2438mm x 2438mm) maximum. PANEL CONSTRUCTION: • Unitized design. • Heavy duty molded fiberglass reinforced polyester shells. • 20 gauge stainless steel edge capping. • Seamless one piece construction. • Standard with stainless steel push/pull handles. FRAME CONSTRUCTION: • Face welded 16 gauge 304, #4 stainless steel (knockdown optional).	APPLICATION: Cleanroom and clean production areas that require limited doorway side clearance. FEATURES: • Heavy-duty fiberglass for personnel and hand truck passage in clean manufacturing/production environments. • Totally seamless unitized one piece fiberglass panels. • Sealed non-absorptive panels with lightweight poured polyurethane foam for exceptional strength and dimensional stability. • Reinforced edges and high luster gel-coated surface. • Highly corrosive resistant panels and hardware. • Internal steel plate reinforcement at hinge areas for added strength. • Stainless steel mounting hardware. • Face welded 16 gauge, 304, #4 stainless steel frame (knockdown and/or 316 stainless steel finish optional). • Powered swing door operator. OPERATION: • Powered swing door operator with (2) wall mounted push plates, 110 volt, single phase. • Safety motion sensor on swing side of door. WARRANTY: • One year on all components. OPTIONS: • Vision panels. • Stainless steel kickplates. • Locksets, panic devices, etc. • Interlock system (i.e. maglocks, etc.). • Four sided seamless 304, #4 stainless steel panels. • Other fiberglass colors (consult factory). 225 pdf
M-230 Swing Door - Single Panel - Power Operation DOOR SIZES: • 8' x 8' maximum. PANEL CONSTRUCTION: • Unitized design. • Heavy duty molded fiberglass reinforced polyester shells. • 20 gauge stainless steel edge capping. • Seamless one piece construction. • Standard with stainless steel push/pull handles. FRAME CONSTRUCTION: • Face welded 16 gauge 304, #4 stainless steel (knockdown optional).	APPLICATION: Cleanroom and clean production areas that require limited doorway side clearance. FEATURES: • Heavy-duty fiberglass for personnel and hand truck passage in clean manufacturing/production environments. • Totally seamless unitized one piece fiberglass panels. • Sealed non-absorptive panels with lightweight poured polyurethane foam for exceptional strength and dimensional stability. • Reinforced edges and high luster gel-coated surface. • Highly corrosive resistant panels and hardware. • Internal steel plate reinforcement at hinge areas for added strength. • Stainless steel mounting hardware. • Face welded 16 gauge, 304, #4 stainless steel frame (knockdown and/or 316 stainless steel finish optional). OPERATION: • Manual. WARRANTY: • One year on all components. OPTIONS: • Vision panels. • Stainless steel kickplates. • Locksets, panic devices, etc. • Interlock system (i.e. maglocks, etc.). • Four sided seamless 304, #4 stainless steel panels. • Other fiberglass colors (consult factory). 230 - 235 pdf
M-240 / M-250 Single Panel - Horizontal Sliding - Manual Operation DOOR SIZES: • 5' x 7' (1524mm x 2134mm) minimum. • 8' x 10' (2438mm x 3048mm) maximum. (Other sizes available - consult factory.) PANEL CONSTRUCTION: • Unitized design. • Structural molded fiberglass reinforced polyester shells.. • 20 gauge stainless steel edge capping. • Seamless panel construction. • Full perimeter gaskets: Non-marking gray vinyl, blade type. OPTIONS: • Stainless steel clad panel. • Color (consult factory). • Vision panel (optional sizes). • Canebolt. • Pushplates mounted in door panel. • (2nd) Reversing photoeye mounted in side frame. • Canebolt lock in door panel. • Touchless wall-mounted activation switch. • Actuators: Pull cord; photoeye; radio control; loop detector; motion detector; or O/C/S pushbutton. • Interlock system.	APPLICATION: Cleanroom and clean production areas that require a controlled environment and frequent washdown/wipedown. FEATURES: • Electromechanical operator with NEMA 4X fiberglass control box. • Specially designed heavy-duty gearbox. Manual operation during unexpected power failures. • High strength Kevlar drive belt for quiet reliable operation. • Unitized high strength 2" (51mm) thick molded seamless lightweight fiberglass panel for easy cleaning. Stainless steel (20 gauge) edge capping for added strength and protection. • Corrosion-resistant heavy-duty door hardware. Recessed stainless steel pull handles. • Top/bottom guidance system positively maintains door seal and position. Ensures fast, controlled operation with minimal gasket wear. • Adjustable top/bottom panel hardware for in-field adjustments. Maintains a positive and tight seal. • Full perimeter, non-marking gray vinyl gasket capable of holding a seal under positive/negative pressure. • Stainless steel sloped shroud conceals rail. • Automatic closer with “Hold-Open” feature. OPERATION: • Manual with automatic closer and "hold-open" feature. • 1/4 HP electromechanical operator with NEMA 4X fiberglass control box. • Open - 24"/sec. (610mm/sec.) • Close 18"/sec. (457mm/sec.) PERFORMANCE FEATURES: • Reversing edge for instant stop/reverse. • (1) Send & receive reversing photoeye. INSULATION: • 2" thick poured polyurethane foam, rated R-16. WARRANTY: • One year on all components. 240 pdf 250 pdf
M-260 / M-270 Bi-Parting - Horizontal Sliding - Power Operation DOOR SIZES: • 5' x 7' minimum (1524mm x 2134mm). • 10' x 10' (3048mm x 3048mm)maximum. (Other sizes available - consult factory.) PANEL CONSTRUCTION: • Unitized design. • Structural molded fiberglass reinforced polyester shells.. • 20 gauge stainless steel edge capping. • Seamless panel construction. • Full perimeter gaskets: Non-marking gray vinyl, blade type. OPTIONS: • Stainless steel clad panel. • Color (consult factory). • Vision panel (optional sizes). • Canebolt. • Pushplates mounted in door panel. • (2nd) Reversing photoeye mounted in side frame. • Canebolt lock in door panel. • Touchless wall-mounted activation switch. • Actuators: Pull cord; photoeye; radio control; loop detector; motion detector; or O/C/S pushbutton. • Interlock system.	APPLICATION: Cleanroom and clean production areas that require a controlled environment and frequent washdown/wipedown. FEATURES: • Electromechanical operator with NEMA 4X fiberglass control box. • Specially designed heavy-duty gearbox. Manual operation during unexpected power failures. • High strength Kevlar drive belt for quiet reliable operation. • Unitized high strength 2" (51mm) thick molded seamless lightweight fiberglass panel for easy cleaning. Stainless steel (20 gauge) edge capping for added strength and protection. • Corrosion-resistant heavy-duty door hardware. Recessed stainless steel pull handles. • Top/bottom guidance system positively maintains door seal and position. Ensures fast, controlled operation with minimal gasket wear. • Adjustable top/bottom panel hardware for in-field adjustments. Maintains a positive and tight seal. • Full perimeter, non-marking gray vinyl gasket capable of holding a seal under positive/negative pressure. • Stainless steel sloped shroud conceals rail. • Automatic closer with “Hold-Open” feature. PERFORMANCE FEATURES: • Reversing edge for instant stop/reverse. • (1) Send & receive reversing photoeye. OPERATION: • Manual with automatic closer and "hold-open" feature. • Panels open and close in unison. • 1/4 HP electromechanical operator with NEMA 4X fiberglass control box. • Open - 36"/sec. (914mm/sec.) • Close 18"/sec. (457mm/sec.) INSULATION: • 2" thick poured polyurethane foam, rated R-16. WARRANTY: • One year on all components. 260 pdf 270 pdf
	• Electromechanical operator with NEMA 4X fiberglass control box. • Specially designed heavy-duty gearbox. • Manual operation during unexpected power failures. • High strength Kevlar drive belt for quiet reliable operation.
	• Unitized high strength 2" (thick molded seamless lightweight fiberglass panel for easy cleaning. • Stainless steel (20 gauge) edge capping for added strength and protection.
	• Frame is mounted directly to wall, with all fasteners hidden except for a small stainless steel scew. • NO hardware mounted into floor.
140 LXP Single Horizontal Sliding Manual 150 LXP Single Horizontal Sliding Powered 160 LXP Bi-Parting Horizontal Sliding Powered 170 LXP Bi-Parting Horizontal Sliding Manual	The LXP Line is a more economical version of the unitized gel coated fiberglass doors specified by the pharmaceutical industry: • Fiberglass sheet laminated to an expanded polystyrene core material, with 20 gauge stainless steel edge capping.

Capabilities

Home

Contact Us

Copyright 2009, BMIL Technologies, LLC.,. All rights reserved
4915 Arendell St., #313, Morehead City, NC 28557, 252-727-0994
Send comments on this web site to bmil@bmil.com.
Last revised August 30, 2006.